Click
Here for
Larger Image |
Operating
Room I.C.U. Timers Analog
GENERAL DESCRIPTION
These are wall mounted timers specifically designed
for elapsed time reference in operating rooms,
delivery and intensive care units. They are available
in two basic movements. One records total elapsed
time up to 60 minutes, and the other movement
records total elapsed time up to 12 hours.
|
|
CONSTRUCTION
- INSTALLATION
The timers are encased in a satin aluminum rim
with white dial. The numerals, increment markers,
and dial hands are a contrasting satin black.
The instant reset, 60 minute or 12 hour timers
have a 10" dial. They are designed for flush mounting
only. Timers are available in a choice of 10 or
12 inch dials. Dimensional diagrams are provided
for both flush and surface mounted units, Outlet
boxes are required for flush mounted timers. Specify
and order boxes separately. Adapter ring, J600052
is required with flush mounted outlet box J600005.
Order as separate item. A single gang box is required
for a surface mounted control station.
OPERATION
Each movement is installed with a wall - mounted
control station as illustrated. The station has
an On-Off switch to start and stop the timer.
The lower switch will reset the timer to zero
reading after each application. The 60 minute
timers have an optional selection of an instantaneous
'solenoid' reset action or a motor drive reset,
which takes approximately 90 seconds. The 12-
hour timers have the instantaneous reset feature.
|
Click
Here for
Larger Image |
120
VAC & Battery Operated Quartz Clock
- Precision
Quartz Movement
- 12"
Round Dial
- Step
Second Hand
- Durable
Steel Case -2303
- Heavy
Duty Glass
Lens -2303
- ABS
Plastic Case and
Lens -2302
- Hanger
Bracket Included
|
Click
Here for
Larger Image |
2362/2364
SERIES SECONDARY CLOCKS DIGITAL-CORRECTIVE
- Two
Character Heights - 2.5 Inch - 4.0 Inch
- High
Visibility
- 12
Hour Correction
- Automatic
Correction after
- 12
or 24 Hour Format
- Stand
Alone Capability
- Count-Down
Timer Option
- Multiple
Mounting Options
|
| The
"STANDARD" 2362 and 2364 Series Digital Secondary
clocks are designed primarily for use with either
the SET 140011401 Series Master Time Programmer
or the SET 1402/1403 Program Time Controller. When
properly connected to one of the 1400 Series Time
Controls, and using an optional 24VDC power supply,
the digital clocks will receive automatic corrections
every 12 hours and for Daylight Savings adjustment.
In addition, these clocks may be used as stand alone
units or they can indicate time in either 12 or
24 hour format (See NOTE #2). Battery backup, for
time keeping during power failure, is accomplished
by means of a standard 9VDC battery (by others)
installed within each unit. Either unit may be adapted
for use as a 59-minute countdown timer (indicates
minutes only) by connecting an optional 2360 Remote
Timer Control. The 2360 flush mounts to a standard
one-gang box. |
